Hubs

New this year every room (other than those in Taylor Hall) will already have a hub package. This means no more walking across campus and waiting in line to check out a hub.

Hubs are used when there are two or more devices that need to be connected to ResNet. Since every room only has one data jack (excluding Taylor) a hub is used to split that connection.

In each room there will be a packaged Hub. This includes instructions, 3 internet cables, 1 power supply and the Hub.

Instructions

There are two different types, a larger gray 3com hub, and a smaller white Netgear one. They have separate directions.

3Com

Plug a network cable in from the data jack to the port from the right on the back of the hub.
Plug the network cable from each computer into any other ports on the hub.
Plug the power supply into the back of the hub and the power outlet.
Make sure the little white button next to the ports on the hubs is pushed in at all times.

Netgear

Plug a network cable in from the data jack any port on the switch.
Plug the network cable from each computer into any other ports on the switch.
Plug the power supply into the switch and a power outlet.

The hub package stays in your room, even if you move. There will be a different hub in the room you move to. If any part of the hub package is missing upon move out both roommates will be billed for the replacement.

Note: Putting duct tape or any other substance on the hub or cables may result in charges as well. It damages the cables so they can not be used again.